Year-End Tech Roundup: WiFi
I turned off the wifi radios on the Synology, and wired a Ubiquiti UniFi access point into it. They make several UniFi models, in various sizes of Miniature White Flying Saucer, and I went with the UAP-AC-LR version (currently less than $95 on Amazon) optimized for long range. Setup wasn't Synology easy, but the discovery/controller app made it fast and painless enough. And like Synology, Ubiquiti uses a browser-based front end -- although you do need the Controller applet running in order to access it.
CAUTION: Ubiquiti's networking abilities run deep. You might not do much more than scratch the surface of what the company's wifi networks can do, which is just fine because you don't need to dig into anything you don't need to use. On the other hand, if you do decide to jump in, you'll find all kinds of fun networking toys to play with. For example, UniFi can support up to four wifi networks. I run the usual two: Home and Guests. For our massive New Years party however, I plan on establishing a third wifi network. It will have limited internet access and restricted bandwidth, but no password. Guests will be able to sign in without any instruction, and the next day I'll simply delete the NYE network as though it never existed. The whole process will take a few mouse clicks and just enough keystrokes to name the temporary network. Nifty.
Did I mention the long range is really long? I tested the LR unit with my phone, and got two bars of wifi, all the way at the bottom of our 150-plus-foot-long driveway. Given the weird shape of our flag lot, that's about 350 feet from the access point.
The problem with having that much power, of course, is that it only makes you want more.
So last week I ordered the UAP-AC-PRO model, optimized for signal strength (about $130 on Amazon). I put the new POWER model up on the top floor in my office, where the old one had been. I figured its more powerful radios would make 5Ghz work better inside the house, where walls and floors can interfere with higher frequencies.
Then, using the miracle of power-over-ethernet (included in both APs) I put the distance-optimized model on an outside-facing wall in the laundry room. The weaker (but range-optimized) radios now have an almost unobstructed view to the outdoors. It took a couple of hours for the two AP units to sort themselves out into a single network, but they did, and again without more effort from me than a few mouse clicks. Wifi transfer rates are even faster and stronger throughout the inside of the house, and my phone is still getting two bars of wifi power -- down the cul-de-sac, around the corner, and three houses up the next street. Wheeee!
Does anyone need that much power? Probably not, but I'm also (like Matt) getting zero interference from the neighbors' wifi networks: Ubiquiti seems to drown them out. Moving around from floor to floor or inside to outside, the access points seamlessly hand your phone or laptop on and off from one AP to the other, to whichever signal is best. Total brainpower required from the user: Zero.
These UniFi access points are essentially commercial-grade radios and firmware, packaged inside prosumer-grade housings. Uptime seems to be measured in months, and Matt tells me he once went a couple of years without even thinking about his gear, much less fiddling with it, until an important firmware upgrade had to be installed.
So if your old wifi router is losing power, I'd recommend you invest in just one of the UniFi APs I purchased, and building your own Frankenstein network out of your old router and a new access point.
Or buy two or three and enjoy power, unlimited power!